Home / Products / DS1-E48xxxM EtherCAT
Product image · DS1-E48xxxM
DS1-E48xxxM EtherCAT 48 V DC servo drive
The DS1 general-purpose platform with the EtherCAT interface board. The DS interface integrates the bus capacitor, so no external bus capacitor is needed on the supply - which is where a lot of the cabinet space usually goes.
| Specification | Value |
|---|---|
| Voltage protection range | 15-60 VDC |
| Rated voltage | 24-48 VDC |
| Rated current | 2-20 Arms |
| Peak current | 6-50 Arms |
| EtherCAT real-time cycle | ≤ 4 kHz |
| Encoder | Differential quadrature up to 10 MHz; absolute BiSS-C, SSI, EnDat 2.2, Tamagawa, Nikon |
| Current sampling | 12-bit |
| STO | 2 inputs, 1 output - R-suffix models only |
| Dimensions | 70 x 50 x 25.3 mm (DS1-E48xxxM) |
| Operating temperature | 0 to +45 °C |
| Certifications | CE, UL, FCC |
What to know about this drive
- The DS interface board integrates the bus capacitor, uses shared compression terminals that are easy to insert and remove, and removes the PE screw requirement.
- Multi-segment trajectory control is built in across the range, which shortens the control loop and makes force control respond faster.
- 4 x isolated digital input at up to 1 MHz, 2 x isolated digital output at 1 kHz, 1 x analogue input +/-10 V 12-bit, internal common-bus brake supply at 1 A, regenerative braking 48 V / 28 A max with PWM output.
Other UF interface options
EtherCAT
Supports STO, and the variant to specify when axes have to be synchronised.
CANopen
Point-to-point bus for single-axis machines. No STO.
Modbus-RTU
Pragmatic when the machine already speaks Modbus everywhere else. No STO.
Pulse and direction
The retrofit route into an existing motion controller. No STO.
Pricing, lead time and the exact ordering code are confirmed on quotation.
Send me the motor model, bus type and axis count and I will come back
with a written answer.