Home / Products / DG3 wide-temperature
Product image · DG3-E72xxxDD
DG3 wide-temperature 48 V DC servo drive with dual encoder
The DG3 family, specified when the cabinet runs hot or cold, or when you want a redundant position channel. Operating range is -40 to +70 °C, and it accepts a dual encoder arrangement - one channel for the motor, one for the stage.
| Specification | Value |
|---|---|
| Operating temperature | -40 to +70 °C |
| Storage temperature | -50 to +80 °C |
| Rated voltage | 24-72 VDC |
| Rated current | 3-20 Arms |
| Encoder | Dual encoder arrangement |
| EtherCAT real-time cycle | ≤ 2 kHz (DG3) |
| Core module dimensions | 55 x 46.5 x 20 mm |
What to know about this drive
- DG3's EtherCAT real-time cycle is ≤ 2 kHz, while other EtherCAT models in the range run ≤ 4 kHz. That matters if you are planning a tightly synchronised multi-axis configuration.
- The dual encoder lets you detect drift or a mechanical fault in the stage itself, rather than inferring it from the motor encoder - a real diagnostic gain where a placement error is expensive to find late.
- For wide-temperature requirements, DG is the family to specify. The UF platform is 0 to +45 °C only.
Other UF interface options
EtherCAT
Supports STO, and the variant to specify when axes have to be synchronised.
CANopen
Point-to-point bus for single-axis machines. No STO.
Modbus-RTU
Pragmatic when the machine already speaks Modbus everywhere else. No STO.
Pulse and direction
The retrofit route into an existing motion controller. No STO.
Pricing, lead time and the exact ordering code are confirmed on quotation.
Send me the motor model, bus type and axis count and I will come back
with a written answer.